Panasonic HC-WXF1 Operating Instructions Manual page 96

High definition/4k
Table of Contents

Advertisement

j If you start recording
j After 3 hours have passed
≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button cannot be recorded.
≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
Self-timer
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Æ10 (Records after 10 seconds) # Æ2 (Records after 2 seconds) # setting cancelled
≥ (For the
WXF1
series/
When [
(Self-timer)] is to be set in an Fn button with the [FN BUTTON SETTING], the setting
changes each time you press the Fn button.
≥ When you press the
recorded. After recording, the Self-timer is cancelled.
≥ In Auto Focus Mode, if the
on the subject when the button is pressed halfway. If the
the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
≥ Setting the Self-timer to Æ2 is a good way to prevent image shake when the
pressed while using a tripod etc.
Intelligent Exposure
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.
Backlight Compensation
This makes the image brighter to prevent darkening of a backlit subject.
Guidelines
You can check if the image is level while recording motion pictures and still pictures. The
function can also be used to estimate the balance of the composition.
It will switch every time the icon is touched.
#
#
WXF1
≥ (For the
series/
When [
(Guidelines)] is to be set in an Fn button with the [FN BUTTON SETTING], the setting
changes each time you press the Fn button.
≥ The guidelines do not appear on the images actually recorded.
VXF1
series)
button, Æ10 or Æ2 flashes for the set period before a still picture is
button is pressed halfway once and then fully, the lens focuses
# Setting cancelled
VXF1
series)
button is pressed fully all at once,
- 96 -
button is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents