Panasonic HC-WXF1 Operating Instructions Manual page 95

Fade
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥ The Fade setting is cancelled when the recording stops.
∫ To select the colour for fade in/out
: [RECORD SETUP] # [FADE COLOUR] #
MENU
[WHITE] or [BLACK]
≥ The thumbnails of scenes recorded using fade in become black (or white).
Intelligent Contrast Control
This brightens parts that are in shadow and difficult to see and suppresses white saturation
in bright parts at the same time. Both bright and dark parts can be recorded clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be
clear.
PRE-REC
This prevents you from missing a shot.
This allows recording of the pictures and sound to start approximately 3 seconds before the
recording start/stop button is pressed.
appears on the screen.
≥ PRE-REC
≥ Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is cancelled in the following cases.
j Press the recording/playback button
j Touch the recording mode switching icon
j (For the WXF1 /
If you remove the SD card
WXF1M
j (For the
If you remove the SD card while [MEDIA SELECT] is set to [VIDEO]/[SD CARD]
j If you touch
MENU
WXF1
j (For the
If you press the recording mode selector button
j If you press the HDR button
j If you press the Wi-Fi button
j If you turn the unit off
VXF1 / VXF11 / VX1
)
VXF1
series/ series)
/ VX11 / V800 / V808
- 95 -
(Fade in)
(Fade out)
)