Panasonic HC-WXF1 Operating Instructions Manual page 111

series/
WXF1 VXF1
[AUDIO LEVEL]
series/
VX1 V800
[MIC LEVEL]
WXF1
(For the series/
Adjust the input level of the built-in microphone and of an external microphone/audio device
connected to this unit when recording.
≥ Change the [AUDIO INPUT SELECT] to suit the input device that is connected.
(For the VX1 series/
When recording, the input level from the built-in microphones and the external microphone terminal
can be adjusted.
1 Select the menu.
(For the WXF1 series/
: [RECORD SETUP] # [AUDIO LEVEL] # desired setting
MENU
VX1
(For the series/
: [RECORD SETUP] # [MIC LEVEL] # desired setting
MENU
[AUTO]:
[SET ]:
[SET ]:
2
(When [SET
Touch /
≥ The adjustment screen to be displayed depends on the
setting of [5.1ch/2ch].
≥ Adjust the microphone input level so that the last 2 bars of
the gain value are not red. (Otherwise, the sound is
distorted.) Select a lower setting for audio input level.
3 Touch [ENTER].
≥ Touch [EXIT] to complete the setting.
series
series
VXF1
series)
V800 series)
VXF1 series)
V800
series)
AGC is activated, and the recording level is adjusted automatically.
The desired recording level can be set. AGC is activated, and sound
distortions are reduced.
The desired recording level can be set. Sounds are recorded in
natural quality.
]/[SET ] is selected)
to adjust.
(l 109)
(When set to [5.1ch])
A Centre
B Front left
C Back left
D Front right
E Back right
F Audio input level
- 111 -