EnGenius ENS500EXT-AC User Manual page 10

11 ac wave2 outdoor acess point/cpe
Hide thumbs Also See for ENS500EXT-AC:
Table of Contents

Advertisement

ENS610EXT
Standard:
IEEE802.11 ac wave2/ac/a/n on 5 GHz
IEEE802.11 b/g/n on 2.4 GHz
Antenna
2 x detachable 5 dBi 2.4 GHz Omni-directional Antennas
2 x detachable 5 dBi 5 GHz Omni-directional Antennas
Physical Interface
2 x 10/100/1000 Gigabit Ethernet Ports with PoE support
LAN1 Port: Proprietary 24V Input
LAN2 Port: Data Transmission
LED Indicator
Power
LAN 1
LAN 2
2.4 GHz
5 GHz
Power Requirements
Proprietary 24V Power over Ethernet (PoE),
Use included EPA2406GP only
Operation Modes
Access Point
WDS
Client Bridge
WDS Detail
WDS AP
WDS Bridge
WDS Station
Management
Auto Channel Selection
Multiple SSID: 16 SSIDs, 8 SSIDs per Radio
BSSID
SNMP V1/V2c/V3
MIB I/II, Private MIB
VLAN Tag/VLAN Pass-through
Clients Statistics
Save Configuration as User Default
Fast Roaming
E-Mail Alert
RADIUS Accounting
Guest Network
Traffic Shaping per SSID/user
Control
CLI Supported
Distance Control (Ack Timeout)
802.1X Supplicant (CB Mode)
Multicast Supported
Auto Reboot
Obey Regulatory Power
Security
WEP Encryption - 64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-PSK using TKIP or AES)
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ens500-acEns610extEns620ext

Table of Contents