Table of Contents
Advertisement
Electrical Connection
This appliance must be installed by a qualified electrician
to comply with the relevant Institution of Engineering and
Technology (I.E.T.) regulations and also the local electricity
supply company requirements.
WARNING: THIS APPLIANCE MUST BE EARTHED
n
This appliance must be connected by a competent person,
using fixed wiring via a double pole switched fused spur
outlet, protected by a 13A fuse (Fig. 8.7).
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C. and
who will comply with the I.E.T. and local regulations. The
wires in the mains lead are coloured in accordance with the
following code:
This appliance must not be connected to an ordinary
n
domestic power point.
The mains terminal is situated on the back of the oven
(Fig. 8.8).
• GREEN AND YELLOW = EARTH
• BLUE = NEUTRAL
• BROWN = LIVE.
As the colours of the wires in the mains lead for the appliance
may not correspond with the coloured markings identifying
the terminals in your spur box, proceed as follows:
1.
The wire which is coloured green and yellow must be
connected to the terminal marked E (Earth) or coloured
Green.
2.
The wire which is coloured blue must be connected to
the terminal marked N (Neutral) or coloured Black.
3.
The wire which is coloured brown must be connected to
the terminal marked L (Live) or coloured Red.
Connect the cable to the correct terminals. Check that the
links are correctly fitted and that the terminal screws are tight.
Secure the mains cable using the cable clamp.
Ensure the cable route avoids the risk of trapping or touching
hot surfaces.
INSTALLATION
Check the appliance is electrically safe when you have finished.
DOUBLE POLE SWITCHED
N
L
ArtNo.130-0006 - Electrical connections BI oven (60)
20
FUSE SPUR OUTLET
13A
FUSE
ON
220V - 240V
1
2
3
R
L
PE
E
Fig. 8.7
Fig. 8.8
4
5
N
Advertisement
Table of Contents
