Kawai ANYTIMEX3 Owner's Manual page 40

Song Recorder
„Selecting the song memory and part
„
1. Swipe left/right or tap the arrow buttons to change the song
memory to be used for recording.
* In Sound mode, up to 10 songs can be recorded.
2. Tap the circle button to the left of the [01] button to select
part1 for recording.
* The circle will turn red to indicate that this part will be recorded to.
* If a part has already been recorded to, the part button will be filled
blue or white.
„Recording the song (part1)
„
1. Tap the [Record Start/Stop] button.
The Recorder will enter Standby mode.
* Press and hold the [Record Start/Stop] button to cancel the Standby
mode.
2. Press a key on the keyboard, or tap the [Record Start/Stop]
button again.
The [Record Start/Stop] button will change colour, and the
recording will start.
* Press the [Metronome Start/Stop] button before or during the
recording to turn on the metronome. The metronome "click" sound
will not be recorded.
40
(Internal memory)
Song memory selection
Part1 selected for
recording
Record Start/Stop button
Record Start/Stop button