MP3/WAV/SMF files
Issue
No sound can be heard when playing an
MP3 or WAV audio file stored on a USB
memory device.
An MP3/WAV audio file stored on a USB
memory device sounds strange, or does
not play back correctly.
When recording MP3/WAV audio
files, the volume is too low/too high
(distorted).
An SMF MIDI file stored on a USB memory
device sounds strange when played back.
Possible Cause and Solution
Check that the audio player volume is not set to 0.
Check that the format of the audio file is supported and listed in the "USB
Memory Player supported formats" table.
Check that the format of the audio file is supported and listed in the "USB
Memory Player supported formats" table.
The file transfer speed of the USB memory device may be too slow to play
the audio file. Please try using a different USB memory device, ensuring that
it conforms to USB2.0 Hi-Speed standards.
Check the gain setting before recording the audio, and if necessary adjust to
increase/decrease the recording level.
This instrument does not contain the full General MIDI sound bank selection.
Consequently, some SMF song files may not be reproduced entirely
accurately when played through this instrument.
Page no.
p. 76
p. 71
p. 71
p. 145
p. 45
p. 45
149