Split - Kawai ANYTIMEX3 Owner's Manual

3

. Split

The Split keyboard mode function divides the keyboard into two sections, allowing each section to be played with a
different sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
„Selecting Split keyboard mode
„
Tap the [Split] button to select Split keyboard mode.
The keyboard will divide into upper and lower sections at key C4.
The sound selection area will divide into two halves. The top
half indicates the upper section sound, while the bottom half
indicates the lower section sound. By default, Wood Bass will be
used for the lower section sound.
„Selecting sounds
„
Selecting sounds in Split keyboard mode is identical to that of Single and Dual keyboard modes.
1. Tap the upper or lower section sound area to enter sound
selection mode.
2. Swipe left/right to change the instrument sound, and up/
down to change the instrument category.
„Split keyboard mode settings
„
Split setting Description
Balance Adjust the volume balance between the upper section and lower section sounds.
Lower Octave Shift Raise/lower the pitch of the lower section sound in octave steps.
Lower Pedal Enable/disable the damper pedal for the lower section sound.
Split Point Set the point on the keyboard that divides the upper and lower sections.
Upper sound
Lower sound
Upper sound
Lower sound
Default Setting
9 - 9
0
Off
C4
25