Manually Update The Channel List; Test Digital Reception; Installation Update - Philips 20HFL3330D/10 User Manual

the channel.
5. Press MENU to exit.
6�6 Manually update the channel
list
You can manually update the channel list.
1. Press MENU on the remote control and
select Install > Channel installation >

Installation update.

2. Press Æ to enter the Installation update
menu. Start now is highlighted.
3. Press OK.
4. Press the green key to start the update.
This may take a few minutes.
5. When the update is complete, press
the red key to return to the Channel
installation menu.
6. Press MENU to exit.
6�7

Test digital reception

If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1. Press MENU on the remote control and
select Install > Channel installation >
Digital: Test reception.
2. Press OK.
3. Press the green key to automatically start
the test or manually enter the frequency of
the channel you want to test. If the signal
quality and strength is poor, reposition the
antenna or satellite dish and retest.
4. When complete, press the yellow key to
store the frequency.
5. Press the red key to return to the
Channel installation menu.
6. Press MENU to exit.
Note: If you have further problems with
D
the reception of your digital broadcast,
contact a specialised installer.
EN-25