Philips 20HFL3330D/10 User Manual page 32

Automatically switch the TV to standby
(Sleeptimer)
Sleeptimer switches the TV to standby after a
defined period of time.
1. Press MENU on the remote control and
select Features > Timer > Sleeptimer.
2. Press Æ to enter the Sleeptimer menu
3. Press Î or ï to set the sleep time up to
180 minutes in steps of five minutes. If set
to zero minutes, the Sleeptimer is switched
off.
4. Press OK to activate the Sleeptimer.
Note: You can always switch off your
D
TV earlier or reset Sleeptimer during the
countdown.
Automatically switch the TV on (Start
time)
Start time switches the TV to a specified
channel at a specified time, from standby.
1. Press MENU on the remote control and
select Features > Timer > Start time.
2. Press Æ to enter the start time menu.
3. Use Î or ï, Æ or Í to select and enter
the menu items to set a channel, day of the
week, frequency and starting time.
4. Press OK to confirm your choice.
5. Press MENU to exit.
Tip: To switch off Start time, select Off in
E
the Start time menu.
Automatically switch the TV off (Stop
time)
Stop time switches the TV to standby at a
specified time.
1. Press MENU on the remote control and
select Features > Timer > Stop time.
2. Press Æ to enter the Stop time menu.
EN-20
3. Use Î or ï , Æ or Í to select and enter
the menu items to set the day of week.
4. Press OK to confirm.
5. Press MENU to exit.
Note: You can always switch off your
D
TV earlier or reset Sleeptimer during the
countdown.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with
a four digit code to prevent children from
watching unauthorised content.
To set or change the Auto Lock code
1. Press MENU on the remote control and
select Features > Auto lock > Change
code.
2. Press Æ to enter the code setup.
3. Enter your code with the number keys.
The Features menu reappears with a
message confirming that your code is
created or changed.
Tip: Use the master code 0711 to reset
E
your PIN code.
To enter the Auto Lock menu
1. Press MENU on the remote control and
select Features > Auto Lock and press
Æ to enter your code.
2. Enter your code with the number keys.
To unlock all channels and connected
devices
1. In the Auto Lock menu, select Clear all�
2. Press OK.
To lock or unlock one or more channels
and connected devices
1. In the Auto Lock menu, select Lock
program.