Philips 42HFL3233D/10 User Manual page 42

Installation
[Blank channel]
The Blank channel function disables the
display of video on the TV, but does not affect
the audio output. This function can be used
for audio applications (example: music-only
channels, and so on) which do not necessarily
require the display of video.
1
Enters the [Blank channel], the list of all
channels appear.
2
Selects one or more channels and press
OK to mark.
3
The channels marked with [X] will not
display video on the TV.
[Auto channel update]
Enables automatic channel update.
[Auto software update]
Enables automatic channel updating.
[Skip scrambled signals]
[Off]: Allows scrambled channels in
the channel list.
[On]: Skips the scrambled channels in
the channel list.
[Multi remote control]
Guest remote control supports up to four
televisions operating in one room without
interference from each other's remote controls.
Each TV and the Guest remote control can be
set to match each others.
40 EN
1
Enters [Multi remote control] and
designate one colour (Blue / Green /
Yellow / Red) to the TV. Selects [Off] to
disable [Multi remote control] function.
2
Sets the Guest remote control to the
corresponding colour by pressing
and one of the colour buttons.
simultaneously for more than 4 seconds.
3
The Guest remote control can operate
the TV with the corresponding colour.
Note
•
EXAMPLE: Press
simultaneously on the Guest remote control for
more than 4 seconds to operate the TV with [Red]
colour selected in [Multi remote control] menu.
•
Guest remote control will be set to default Blue colour
after replacing batteries.
[MyChoice]
[Off]: Disables MyChoice function.
[On]: [MyChoice] appears in the
Guest home menu.
MENU > [MyChoice] and
Press
enters authorized PIN code to watch
MyChoice channels.
[ThemeTV]
[Off]: Disables ThemeTV function.
[On]: Enables ThemeTV function.
[Startup]: Enables ThemeTV function
at TV startup.
MENU and Red button
MENU