Table of Contents
Advertisement
Quick Links
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Philips 22HFL3233D/10
Summary of Contents for Philips 22HFL3233D/10
- Page 1 Philips Hospitality TV Installation Manual for 22HFL3233D/10 26HFL3233D/10 32HFL3233D/10 42HFL3233D/10 Version 1.0...
-
Page 2: Table Of Contents
Contents Requirements before starting the installation ......................2 Find out the state of the TV ............................3 Re-install TV ................................4 Installation wizard..............................6 Channel options ..............................12 Reordering channels ............................12 b. Rename channels ..............................16 c. Hide channels ................................16 PBS Mode ................................ -
Page 3: Requirements Before Starting The Installation
Guest Remote by pressing 1,2,3,6,5,4. Go to: http://www.support.philips.com/support Enter the model number and check to confirm you have the latest version available. Confirm the software version present on TV is identical with the one from website. If not please download the latest version from website, unzip and save on to a USB key The USB key must be format FAT32 and preferably empty to avoid and accidental upload of wrong setting and software. -
Page 4: Find Out The State Of The Tv
2. Find out the state of the TV It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before. If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of this manual. -
Page 5: Re-Install Tv
3. Re-install TV If you want to start an installation from scratch you can always re-install the TV. This can be done by using the option: Re-install TV set. If PBS is active you can access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button (For the guest remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’) , then go to Consumer Setup, confirm with “OK”. - Page 6 Navigate to “Reinstall TV” Press “OK” to reinstall TV set. If all is correct select “YES” and press “OK”. After this operation the TV will power off and on and display the installation wizard. Note: All settings are at default values and no channel plan is available. After reinstalling, the PBS Setup menu will keep the PBS Mode, Room ID and PBS Setup menu and reset all other parameters to default values.
-
Page 7: Installation Wizard
4. Installation wizard. When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen. Here you will need to select your preferred language. After this, you will need to select the country. Depending on the country selection, some pre-defined settings will be activated. - Page 8 The next step is to choose between ‘Shop’ and Home’ use. If you select “SHOP” an ‘e-sticker’ banner will be displayed on the TV. This is for commercial purpose only. Now you can select the visual and hearing impaired options. If you select ‘On’, your TV will automatically turn on settings to help visual and hearing impaired people.
- Page 9 For the channel installations, select ‘Install TV channels’ and press ‘OK’ Then you can select ‘Continue’ and press ‘OK’ again. Here you can select the type of channels you would like to install. 1. Antenna (DVB-T) + analogue channels 2. Cable (DVB-C)+ analogue channels Note: The installation wizard is identical for DVB-T and DVB-C.
- Page 10 It is advisable to check the settings before starting the search. The first option in the settings page is the “Frequency scan”. This has 2 options: “Quick”: this is a fast method to search channels but it might skip some channels (depending on the network).
-
Page 11: Reset
The last option is “Reset” and this will reset the search settings to default. After you have checked or changed settings, you can select “Done” and select “Start” to start the channel search. During the channel search you can see the progress bar and how many channels are found at that time. When the search is done, you should see “Channel search complete”... - Page 12 A wizard will start to guide you through the process of setting the sound and picture on the TV set. Select “Continue” to start the wizard and press “OK” on remote control. The wizard will ask you some questions about which image you prefer, select the option you desire and press “OK” on the remote control.
-
Page 13: Channel Options
5. Channel options a. Reordering channels Check if PBS Menu is active. Press “Home” button to see the guest menu. If the menu is displayed with “Add new device” and “Help”, the PBS Menu is not active. If the menu is displayed without “Add new device” and “Help”, the PBS Menu is active and TV menu has restrictions. Also in the Guest menu are options that will not be displayed if PBS Menu is active. - Page 14 The PBS menu will appear like in picture. Using the arrow keys you can navigate through this MENU. To disable PBS mode use arrow keys to select the “OFF” option and confirm with “OK”. The previous menu will be active, use left arrow to go the base menu of the PBS menu. Go to “Store” option down the bottom of the menu and press “OK”.
- Page 15 When you press “OK” the next image will appear and you will have to confirm. After the confirmation the TV will restart. After power on all PBS settings will be disabled. This menu will allow you to set up channels, reinstall channels, change picture settings, add new devices. As you can see in the picture you have two new sections: “Add new device”...
- Page 16 Select “Reorder” and Press “OK” button on the remote control to reorder channels. Navigate to the channel that you want to move and Press “OK” on the remote control to select that channel. The arrows around the channel indicate that the channel is selected and can be moved. Use arrow keys to move the channel to the new position.
-
Page 17: Rename Channels
When you are finished with the re-ordering press “Options” on the remote control again. Press “OK” on the remote control to confirm that you are done with the re-ordering. b. Rename channels Select the channel, press the “Options” button on the remote control and select “Rename” to change name of a channel. -
Page 18: Pbs Mode
6. PBS Mode [Off]: The TV operates as a basic (consumer) TV. [On]: All settings in the PBS mode Setup menu are active. Only by switching on this mode the TV acts as a Hospitality Sets the room ID. Room ID can be used to distinguish between different floors/rooms/setups when using SmartInstall. - Page 19 When the TV is switched on it will start up on the specified source/channel. Available EXT1, EXT2, VGA, HDMI, HDMI side, AV side or one of the installed TV channels. When the TV is switched on it will start up on the specified volume level.
- Page 20 [On] To enable the welcome message. [Off] No welcome message Line 1: First line of welcome message. Line 2: Second line of welcome message. Clear: Will delete the message enter on welcome message. When pressing “OK” button on remote control while editing line 1 or 2, a virtual keyboard will pop up on screen.
- Page 21 TV inoperable with the guest remote control. [Off]: Disables HDMI-CEC feature. [On]: Enables HDMI-CEC feature. Philips EasyLink (HDMI-CEC) enables one-touch play and one-touch standby between HDMI-CEC compliant devices. [Off]: When USB is plugged in, the [Multimedia] menu will not appear automatically, but users can access [Multimedia] menu from the Consumer menu by selecting “Browse USB”.
- Page 22 [Off]: Disables teletext. [On]: Enables teletext. [Off]: Disables MHEG. [On]: Enables MHEG. [Off]: Disables EPG. [On]: Enables EPG. [Off]: Closes subtitles. [On]: Displays subtitles. [On during mute]: Displays subtitles when audio is muted. [Off]: Disables USB multimedia function. [On]: Enables USB multimedia functions. Feature is not influencing cloning and/or software upgrade via USB.
- Page 23 Defines the time interval between numeric buttons when users press digits on the remote control. Selectable values from 0.5 to 9.9 seconds. Allows the installer to define which external sources to be displayed on the source list when pressing AV button on the Guest remote control.
- Page 24 [Off]: The volume +/- on the Guest remote control will affect both the TV Main speaker and the headphone volume. [On]: The volume +/- on the Guest remote control will affect both the TV Main speaker and the headphone volume. After pressing “MUTE”, the volume +/- on the Guest remote control will not reactivate the TV Main speaker volume, but will only control the headphone volume.
- Page 25 To set the color of the TV in multi remote. Guest remote control supports up to four televisions operating in one room without interference from each other’s remote controls. Each TV and a Guest remote control can be set to match. Selectable values: Blue, Green, Yellow, Red.
- Page 26 This will store all settings and restart TV to apply all changes. After storing PBS settings, the TV will restart to apply the new parameters. Now you can clone all settings to other TV sets by using the option TV to USB and USB to TV. Check how to clone settings.
-
Page 27: Welcome Logo
7. Welcome Logo Startup time takes up approximately 7 seconds File format: 1280 x 720 / PNG / NO layers / 256 colors Note: below timing values are approximate indications and can differ from real situation! How to upload Welcome Logo 1. -
Page 28: Cloning
[Startup]: ThemeTV is show at startup, but the function can be trigger by pressing the ThemeTV button on the RC. [VSecure] VSecure is the hospitality content scrambling method used by the Philips Hospitality TVs. If you are interested to use it please contact the local Philips Hospitality TV sales representative. -
Page 29: Csm Menu (Consumer Setup Menu)
CSM (Consumer Setup menu) The CSM contains data about the TV software, serial number and other details. The menu can be accessed using a standard remote control or using the master remote control. 1. Using the standard remote control: press the following key sequence “1,2,3,6,5,4” 2.