Pld Version Upgrade Procedure; 5-1Pld Version Up Method 1 (Altera) - Panasonic BT-LH900P Service Manual

5. PLD Version Upgrade Procedure

This Model uses PLDs. When you upgrade version, use the special tool, connect to the connector for writing of
each PLD, and use the PLD writing software.
Circuit board
name
MAIN P.C.B.
5-1. PLD Version up Method 1 (ALTERA)
A. Preparation
ITEM
CPLD WRITER
D-sub 25pin-25pin Cable Straight (Male - Female), Length : Within 1meter
Version Upgrade
Software
File NAME
Personal Computer
B. Connection
1. Connect the D-sub Cable between CN201(for ALTERA) connector of the CPLD WRITER (VFK1590) and
Personal Computer (Printer port).
2. Connect the CPLD WRITER Cable (VFK1590P2) between the connector for writing of each PLD (refer to
below) and P2 connector of CPLD WRITER.
3. Turn on this model and Personal Computer (Windows mode).
PC
Name
FPGA1
FPGA2
VFK1590
VFK1590P2
MAX+plus II Software ver9.6 or over ver9.6
(Please access to
www.altera.com/support/software/download/sof-download_center.html) and
select "ASAP 2" in programming software portion in order to download it.
jcf File (Included in "vvvsi xxxx" file).
(Copy all files of the VVVSI**** which is included " *.jct " file to floppy disk)
WINDOWS 95Ò or 98Ò
D-SUB 25 pins
CABLE
CONNECTOR
CN201
(Altera)
CONNECTOR P201
(Altera)
VFK1590P2G
(Altera)
Figure 12-3-1 Connection for CPLD writer
Connector for
Ref. No.
IC6400
P3605(P6104)
IC6600
REMARK
VFK1590
INF-8
PLD maker
writing
ALTERA
BT-LH900P