Table of Contents
Advertisement
C. Boot up the Ver. up Software and Ver. up Procedure
1.
Insert floppy disk (which is included all files of the VVVSI***) to floppy drive.
2.
Select "start button" on the Windows Screen and then "Program" and then boot up the "MAX+plus II ***
programmer only" so that the following menu appears.
3.
On main window, select tab "MAX+plus II" and then "Programmer".
4.
On main window (Programmer window is displayed), select tab "Option" and then "Hardware Setup".
5.
On Hardware Setup dialog, set the "Hardware Type" to "Byte Blaster (MV) ".
6.
On main window, select tab "JTAG", and then select "Restore JCF...".
7.
Select the floppy drive and then, select the "jcf format file (***.jcf) on dialog box of Restore JCF" and then
press "OK" button.
INF-9
Advertisement
Chapters
Table of Contents
