Care And Maintenance; Disposal; Specifications - CO/Tech CT-2410-UK Instruction Manual

Things to consider when drilling into concrete, tile or brick
- Use Tungsten carbide tipped drill bits.
- Use a drill with hammer/impact action and work carefully, applying constant
pressure.
- The material residue comes out of the drilled hole as powder or dust, wear a
dust mask.

Care and Maintenance

- Before using the drill, make sure that all the screws are tightened. When
impact drilling the machine will vibrate a great deal.
- Make sure the cool air vents on the machine are free and open.
- Clean with a damp cloth when needed using only mild detergent. Never use
solvents or strong detergents.
Store the instruction manual together with the drill.

Disposal

Follow local ordinances when disposing of this product. If you are
unsure about how to dispose of this product contact your municipality.

Specifications

Mains Supply 230 V AC, 50 Hz
Power 1050 W
No-Load Speed: 0-900/2500 rpm
Chuck Capacity 1.5 - 13 mm
Drilling Capacity: Steel:
Concrete: 20 mm
Wood:
13 mm
40 mm
11