Other Features; Set The Alarm Timer; Set The Sleep Timer - Philips DC320/98 User Manual

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold ALM 1 or ALM 2 for 2
seconds.
[AL 1] or [AL 2] begin to blink.
»
3
Press SOURCE to select an alarm sound
source: iPod/iPhone, iPod/iPhone playlist,
FM tuner, or buzzer.
4
Press ALM 1 or ALM 2.
» Hour digits begin to blink.
5
Press / repeatedly to set the hour.
6
Press ALM 1 or ALM 2 to confirm.
Minute digits begin to blink.
»
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
•
If you set iPhone/iPod playlist as the sound
source, you must create a playlist in iTunes
called "PHILIPS" and import it to your iPhone/
iPod.
•
If no playlist is created in the iPod/iPhone or
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [
»
[ AL2] is displayed.
If the timer is deactivated, [
»
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later.
»
Tip
•
You can press /
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows
gradually decrease.
AL 1] or
AL1] or
to adjust the interval to
, and the volume will
EN
13