Thermostat Menu - Honeywell W8735D Owner's Manual

Thermostat Menu

Press 1 from the Main menu to select the Thermostat
menu. From this menu you can change the
thermostat setting for an individual thermostat or all
thermostats at once, and (if available) listen to the
outside temperature and the indoor humidity level.
The Thermostat menu announcements indicate the
following:
1. Press 1 to change a single thermostat's settings.
• See "1. Changing Single Thermostat Settings"
on page 12
2. Press 2 to change the settings for all
thermostats at once.
• See "2. Changing Global Thermostat
Settings" on page 13
3. Press 3 to hear the outdoor temperature.
• See "3. Current Outdoor Temperature" on
page 13
4. Press 4 to hear the current indoor humidity level.
• See "4. Current Indoor Humidity" on page 13
5. Press 5 to change the degree scale to
Fahrenheit (ºF) or Centigrade (ºC).
• See "5. Changing the Temperature Scale" on
page 13
To return to the Main menu at
any time from any menu, press
the star (*) key.
1. Changing Single Thermostat Settings
The Thermostat Settings sub-menu allows you to
change the following for each thermostat.
The announcements are: "The current
temperature of (zone) is (__) degrees.
The current system setting is (Off, Cool, Heat).
The (Cool, Heat) setpoint is (__) degrees.
Press 1 to change the system setting.
Press 2 to scroll to next zone.
Press 3 to scroll to previous zone.
Press 4 to change heat setpoint.
Press 5 to change cool setpoint.
Press 9 to repeat this menu.
Press # to return to the Thermostat menu.
Press * to return to the Main menu."
1. Press 1 to change the current thermostat's
system setting (Off, Cool, or Heat).
• Each time you press 1, the setting cycles
between Off, Cool, and Heat.
2. If more than one zone is present, press 2 to
move to the next zone.
3. If more than one zone is present, press 3 to
move to the previous zone.
12 69-2028—01