Recalling Presets; Changing Volumes - Martin Audio Engineer 418 User Manual

Hide thumbs Also See for Engineer 418:
Table of Contents

Advertisement

3.21 Recalling presets

To recall a preset from the Martin Audio Engineer Remote, just press the 'Preset' up or down button, the
display will show 'selecting' and the name of the preset. After 3 seconds the currently selected preset is
recalled. Refer to the software manual for creating and assigning presets.

3.22 Changing volumes

To change the volume of a zone, just press one off the 'Zone' up or down buttons. The display will show the
zones that have been created in the Engineer Windows® PC software and the MASTER volume. Once the
correct zone is selected, the volume is changed through the 'Volume' up and down arrows. Refer to the
software manual for creating and assigning zones.
ATTENTION: To use the Engineer Remote, DISCONNECT THE PC from the Martin Audio Engineer 418
or Martin Audio Engineer 818 If the Engineer Remote and the PC are connected at the same time, only
the connection between the PC and the Martin Audio Engineer 418 or Martin Audio 818 will be active.
ENGINEERHARDWAREMANUAL1.1[1].doc
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Engineer 818

Table of Contents