Table of Contents
Advertisement
3.14 Installation
The Martin Audio Engineer Remote panel is to be mounted onto a standard DIN installation box and finish
cover. The figure below shows how to install the product into the installation box.
1
- Attach the Martin Audio Engineer remote mounting plate to the DIN installation box with two M3
screws (length as required)
2
- Connect the CAT5 cable to the header on the Engineer Remote (see: wiring scheme)
3
- Push the Engineer Remote onto the mounting plate, with a suitable finish cover in between.
ENGINEERHARDWAREMANUAL1.1[1].doc
25
Advertisement
Table of Contents
