Connecting A Decoder - Philips DVDR520H/05 User Manual

C
ONNECTING A

Connecting a decoder

Notes:
Enter Channel Editor menu to set decoder on for the desired channels. (refer to the section titled "Channel Editor")
D
ECODER
Connect the CANAL+ Decoder to the unit and the TV set
as shown:
1. Use a RF antenna cable to connect the RF IN jack on
the unit to the antenna outlet. (
Use a RF antenna cable to connect the RF OUT jack on
the unit to the RF IN jack on the television.(
2. Use a SCART cable (not supplied) to connect the
SCART IN jack on the unit to the SCART OUT jack on the
CANAL+ Decoder. (
Use a SCART cable to connect the SCART OUT jack on
the unit to the SCART IN jack on the television. (
11
)
)
)
)