Optional Connections; Connecting To An Stereo System; Stereo System Has Right/Left Audio In Sockets; Connecting To A Digital Av Receiver - Philips DV 435 Series User Manual

Optional connections

Connecting to an stereo
system
STE RE O
AUDIO OUT
Stereo system has right/ left Audio
In sockets
A
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
B
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) sockets of
the DVD Player to the corresponding
AUDIO IN sockets on the stereo system
(cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
10
01-34 xDV435_436_75_eng3.indd 10 01-34 xDV435_436_75_eng3.indd 10
AUDIO
IN
DIGITAL
DIGIT A L
OUT VIDEO OUT
COAXIAL
A
B
C
Connecting to a digital AV
receiver
A V R eciever
DIGIT A L
OUT VIDEO OUT
AUDIO OUT COAXIAL
Receiver has a PCM, Dolby Digital
or MPEG decoder
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In socket on your receiver (cable not
supplied).
Set the DVD player's digital output to
PCM or ALL depending on the
capabilities of your receiver (see page 25
{Digital Out}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDI O
IN
DIGITAL
2006-04-26 4:31:34 PM 2006-04-26 4:31:34 PM