Optional Connections; Connecting To A Stereo System; Stereo System Has Right/Left Audio In Jacks; Connecting To A Digital Av Receiver - Philips 437K User Manual

Connecting to a stereo
system
ST E R E O
AUDIO OUT
Stereo system has right/ left Audio
In jacks
A
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of the
DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
01-41_437K_55_eng.indd 11 01-41_437K_55_eng.indd 11
AUDIO
IN
DIGITAL
DIGIT AL
TV OUT
OUT
COAXIAL
COMPONENT VIDEO OUT
A
B
C

Optional connections

Connecting to a digital AV
receiver
AV Receiver
AUDIO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
Set the DVD player's digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 31
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
DIGITAL
DIGIT AL
TV OUT
OUT
COAXIAL
COMPONENT VIDEO OUT
11
2007-01-31 5:31:16 PM 2007-01-31 5:31:16 PM