Table of Contents
Advertisement
Diamond Custom Machines Corp.
manual.
e. Tilt lock pin must be placed and locked before operation of the equipment.
Never l eave the unit unattended while operating. Close supervision is always necessary
f.
when the appliance is in operation. Only trained staff should be permitted to operate
the unit.
g. Do not touch the rotating drum while in operation.
h. Loose clothing and long hair must be secured prior to operation.
i.
Never put your hands or any other objects into the drum during operation. Checking
the contents can be done only when the unit is turned off and after complete stopping
of the operation.
j.
Do not touch any moving parts of the machine when in operation.
k. Do not use any accessory attachments that are not recommended by Diamond Custom
Machines Corporation. This may cause personal injuries and/or damage to the unit.
B.
Electrical Safety
a. Use this product with rated voltage AC outlet only. Use a dedicated electrical
outlet/circuit for the unit. The unit may not work with certain types of GFCI outlets. You
may need to use a regular outlet to run this machine.
b. To protect against electric shock, d o not immerse the power cord, power plug or the
machine in water or in any other liquid.
c. Always switch off the unit and unplug the cord when the machine is not in use.
d. Do not o perate the appliance with a damaged cord or plug.
e. If the appliance has malfunctioned or has been damaged in any way, call an
Authorized Service Technician for examination or repair.
f.
Disconnect the unit during cleaning or when not in use.
g. Periodically check the power cord for any visible damages.
h. Do not allow the power cord to touch hot surfaces.
i.
Do not allow the power cord to hang loose.
C.
Precautions
a. Always Plug the DCM Melanger 20 M ark 2 i nto an appropriate motor-rated outlet.
b. Never handle the plug with wet hands.
c. Ensure that the electrical outlet is properly grounded.
d. Ensure the tilt S top Locks a re in place and pinned so that the Melanger does not
accidentally tilt during operation.
e. Do not dry run the DCM Melanger 20 M ark 2 prior to adding ingredients for an
extended period of time. Dry running will cause the stones to fail prematurely.
f.
In case of any blockage switch off the machine immediately. Please visit the
Troubleshooting section to learn more.
g. Operate the machine only when it is in the upright vertical position. Do not attempt to
run the machine when it is tilted.
h. While cleaning the machine after use, ensure that water does not enter the motor
compartment.
Version 1 : 16 April 2018
U ser Manual Model: DCM - 20
Page 5
of 2 8
Advertisement
Table of Contents
