Diamond Custom Machines Corp.
10. SERVICE, MAINTENANCE and REPAIRS
The Gearbox, the motor and the control panel do not require regular service or maintenance. It is
a good practice to rotate the roller stones inside out once every month to ensure that the stones
wear uniformly. The drum and the stones have to be cleaned as per your internal changeover
operating procedures.
If direct support or replacement parts are needed, contact us at the information below.
11. WARRANTY INFORMATION
1-year Limited Warranty.
Diamond Custom Machines Corporation (DCM) warrants that for a period of one year from the
date of purchase, this product will be free from defects in material and workmanship. DCM, at its
option, will repair or replace this product or any component of the product found to be defective
during the warranty period. Replacement will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may be made with a similar
product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or
adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This
warranty is valid for the original purchaser from the date of initial purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is required to obtain warranty performance.
DCM dealers, service centers, or retail stores selling DCM products do not have the right to alter,
modify or any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following:
negligent use or misuse of the product, use on improper voltage or current, use contrary to the
operating instructions, disassembly, repair or alteration by anyone other than DCM authorized
service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes
and tornadoes.
What are the limits of DCM's liability?
DCM shall not be liable for any incidental or consequential damages caused by the breach of any
express, implied or statutory warranty or condition.
Except to the extent prohibited any applicable law, any implied warranty or condition of
merchantability or fitness for a particular purpose is limited in duration to the duration of the
above warranty.
DCM disclaims all other warranties, conditions or representation, express, implied, statutory or
otherwise. DCM shall not be liable for any damages of any kind resulting from the purchase, use
or misuse of, or inability to use the product including incidental, special, consequential or similar
damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any
claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you.
Version 1 : 16 April 2018
U ser Manual Model: DCM - 20
Page 2
5
of 2 8