Change Startup Message Settings - Philips 47PFL7404H/12 Manual

5
Press OK.
[Installation] menu appears.
The
»
Note
•
If you have further problems with the
reception of your digital broadcast, contact a
specialised installer.
Change startup message
settings
Enable or disable messages that appear at
the startup to indicate whether a channel or
installation update is needed.
1
In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Channel update
message].
2
Press OK.
3
Press the Navigation buttons to select
[On] or [Off].
Startup messages are enabled or
»
disabled.
EN
36