2
Press the Navigation buttons to select:
•
[On]Enables subtitles.
[Off]Disables subtitles.
•
[On during mute]Displays subtitles
•
only when audio is muted.
3
Press OK.
Subtitles are enabled or disabled.
»
4
Press
BACK to exit or press
(Home) to go back to the home menu.
Select a subtitle language on digital TV
channels
Note
•
When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1
When watching TV, press
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
3
Press OK.
[Setup] menu appears.
The
»
4
Press the Navigation buttons to select
[Features] > [Subtitle language].
A list of subtitle languages appears.
»
5
Press the Navigation buttons to select a
language.
6
Press OK to confirm your choice.
»
The subtitle language is applied.
Note
•
Select preferred subtitle languages in the
[Languages]menu. Subtitles automatically
appear in the preferred languages when
enabled.
EN
26
(Home).
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Display the TV clock
You can display a clock on the TV screen,
displaying the current time.
1
When watching TV, press
The options menu appears.
»
2
Press the Navigation buttons to select
[Clock].
3
Press OK to confirm your choice.
The clock displays on the TV screen.
»
Note
•
To disable the clock, repeat the procedure
above.
Tip
•
The clock is also accessible via the
[Setup]menu (see 'Access the setup menu' on
page 13).
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. If clock mode is
[Manual], time data is based on your current
time zone (see 'Step 1 Select your system' on
page 33) and daylight saving conditions (see
'Enable or disable daylight saving' on page 27).
1
When watching TV, press
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
3
Press OK.
[Setup] menu appears.
The
»
OPTIONS.
(Home).