Manually Update The Channel List; Test Digital Reception - Philips 47PFL7404H/12 Manual

Manually update the channel
list
If your TV is in standby mode, an update is
performed every morning. This update matches
channels stored in your channel list with those
available from your broadcaster.
In addition to this automatic update, you can

manually update the channel list.

Tip
•
To disable the automatic update, in the
[Installation] menu, press the Navigation
buttons to select [Channel installation] >
[Channel update in standby], then select
[Off].
1
In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Automatic installation].
2
Press OK.
A message appears with
»
selected, prompting you to start the
channel update.
3
Press OK.
» The channel update screen appears.
4
Press the Navigation buttons to select
[Update channels].
Re-install channels
Select Update channels els
to update your current t
Update channels
channel list. Select Re- e-
install channels to search arch
and store all channels s
again.
5
6

Test digital reception

If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1
[Start]
2
3
4
Press OK.
Follow the on-screen instructions
»
to complete channel update. When
the update is complete, [Done] is
selected and a list of added channels is
displayed.
Press OK.
[Installation] menu appears.
The
»
In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Digital: Reception test] >
[Search].
Press OK.
[Search] menu appears.
» The
Press:
• The Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
Navigation buttons to select
• The
[Search], then press OK to
automatically search for the next
channel.
If the signal quality and strength
is poor, reposition the antenna or
satellite dish and retest.
When complete, press the Navigation
buttons to select [Done].
EN
35