Overview
2.2 Related Documentation From Texas Instruments
This user's guide is available from the TI website under literature number SBOU241. Any letter appended to the
literature number corresponds to the document revision that is current at the time of the writing of this document.
Newer revisions are available from
477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both
title and literature number.
further information. The device name links to the product web folder on www.ti.com. The literature number links
to the document PDF.
3 Hardware
The EVM is an easy-to-use platform for evaluating the main features and performance of the INA234 or INA236.
The EVM supports current measurements up to 10 amps, and includes a graphical user interface (GUI) used to
read and write device registers as well as view and save results data.
The EVM is intended to provide basic functional evaluation of the devices. The layout is not intended to be a
model for the target circuit, nor is it laid out for electromagnetic compatibility (EMC) testing. The EVM consists
of two printed circuit boards (PCBs). The larger PCB is referred to as the EVM, and has either the INA234 or
INA236 installed. The smaller PCB is referred to as the SCB Controller, and is used to interface the EVM with
the GUI.
3.1 Features
•
GUI support to read and write device registers as well as view and save results data
•
EVM detached from SCB for custom use cases
•
Conveniently powered from a common micro-USB connector through the SCB
4
INA234EVM and INA236EVM
www.ti.com
or the Texas Instruments' Literature Response Center at (800)
Table 2-3
lists documentation related to the EVM. Click the links in
Table 2-3. Related Documentation
DOCUMENT TITLE
INA234
data sheet
INA236
data sheet
Copyright © 2022 Texas Instruments Incorporated
DOCUMENT LITERATURE
NUMBER
SBOS844
SBOSA81
SBOU264A – MAY 2021 – REVISED FEBRUARY 2022
www.ti.com
Table 2-3
for
Submit Document Feedback