Table of Contents
Advertisement
SEBU8430-02
• (B) The oil flow is to the left hand oil filter.
• (C) The oil flow is to the right hand oil filter.
1. Rotate the changeover valve to position B. By
using a suitable tool (2), remove the right hand oil
filter.
Note: Oil flow direction (D and E ).
2. Ensure that the sealing face on the housing is
clean. Fill the new oil filter with clean engine oil.
Install the new oil filter. Rotate the changeover
valve to position A. Check for oil leaks.
3. Rotate the changeover valve to position C. By
using a suitable tool, remove the left hand oil filter.
4. Ensure that the sealing face on the housing is
clean. Fill the new oil filter with clean engine oil.
Install the new oil filter. Apply hand pressure only
in order to install the oil filter. Rotate the
changeover valve to position A. Check for oil
leaks.
5. Clean any spillage of engine oil.
Engine Oil Filter - Change
Note: Refer to Operation and Maintenance Manual,
"Engine Oil sample - Obtain" before performing
maintenance.
Replace the Oil Filter
Table 18
Required Tools
Tool
Part Number
-
A
NOTICE
Perkins oil filters are manufactured to Perkins Engine
Company LTD specifications. Use of an oil filter that
is not recommended by Perkins Engine Company
LTD could result in severe damage to the engine.
Large particles from unfiltered engine oil will cause
damage to the engine. Do not use oil filters that are
not recommended by Perkins Engine Company LTD.
Note: All six oil filters must be changed as a set.
i02888171
Qty
Part Name
Strap Wrench
1
Illustration 47
Typical example
1. Use Tooling (A) in order to remove the oil filters (1).
2. Ensure that the sealing face of the filter base (3) is
clean.
3. Lubricate the sealing rings (2) with clean engine
oil.
4. Install the new oil filters (1).
Note: Apply hand pressure only in order to tighten
the oil filters.
Fill the Oil Pan
Refer to Operation and Maintenance Manual, "Fluid
Recommendations" for information on suitable oils.
1. Remove the oil filler cap.
2. Fill the oil pan with the correct amount of new
engine lubricating oil. Refer to Operation and
Maintenance Manual, "Refill Capacities" for more
information.
NOTICE
If equipped with an auxilliary oil filter system or a re-
mote filter system, follow the OEM or the filter manu-
facture's remonmendations. Under filling or over
filling the crankcase with oil can cause engine
damage.
Note: Before starting the engine, crank the engine on
the starter in order to obtain oil pressure.
65
Maintenance Section
Engine Oil Filter - Change
g01442022
Advertisement
Table of Contents
