Table of Contents
Advertisement
62
Maintenance Section
Engine Crankcase Breather - Clean/Replace
Illustration 40
Typical service indicator
In order to reset the indicator, you must press the
button (1).
If the service indicator does not reset easily, the
service indicator should be replaced.
The service indicator may need to be replaced
frequently in environments that are severely dusty.
Engine Crankcase Breather -
Clean/Replace
Open Breather
1. Ensure that the power supply is disconnected from
the engine.
2. Remove the wing nut (1) and the cover (2).
g01223729
Illustration 41
Typical example
3. Remove the filter elements (3) from the breather
body (4).
4. By using a suitable cleaning fluid, clean the filter
elements (3) and dry the filter elements. Inspect
the filter elements for damage or deterioration. If
necessary, replace the filter elements.
5. Clean the cover and clean the body of the
i02888182
breather.
6. Install the filter elements (3) to the breather body
(4).
7. Ensure that the seal in the cover (2) is free from
damage. If necessary, replace the seal.
8. Align the cover (2) with the dowel (5). Install the
cover to the breather body (4).
9. Install the wing nut (1). Tighten the wing nut
securely.
10. Connect the power supply to the engine. Operate
the engine and check for leaks.
Engine Crankcase Breather -
Clean/Replace
Closed Breather System
Ensure that the power supply is disconnected from
the engine.
SEBU8430-02
g01224945
i02978569
Advertisement
Table of Contents
