Connecting The Ac Adapter - Olympus DP26 Instructions Manual

3
19
3
2
CAUTION
1
CAUTION
4
CAUTION

Connecting the AC adapter

• Always use the
Using an other AC adapter will result in malfunction or damage.
• The cords and cables are vulnerable to bend or twist.
Do not apply excessive force to them.
1) Insert the output plug 1 of the AC adapter into the DC input
connector 2 of the camera head.
2) Insert the connector 3 of the power cord into the input connector
4 of the AC adapter.
• Always use the power cord provided by Olympus. If no pow-
er cord is provided with the camera head, please select a
proper power cord by referring to chapter "PROPER SELEC-
TION OF THE POWER CORD" at the end of this instruction
manual (page 29).
• Connecting the power cord connector improperly will cause
the system failure. Be sure to connect it properly.
3) Insert the power cord plug into the power outlet. Connect the
power cord correctly and ensure that the grounding terminals of
the power supply and wall outlet are properly connected.
If the equipment is not grounded properly, Olympus can no
longer warrant the electrical safety performance of the
equipment.
} The AC adapter generates heat after long hours of use, but this is
not malfunction.
} The AC adapter of the camera is required only when it is
connected to a laptop PC. It is not necessary when it is
connected to a desktop PC or controller.
AC adapter provided by Olympus.