Power Supply; Connecting The Power Supply; Attaching The Battery; Selecting The Default Settings - Sony LPM-770BP Operating Instructions Manual

Power Supply

Connecting the Power Supply

Make sure the POWER switch is OFF before connecting
the power supply.

Attaching the Battery

Notes
• Use a charged battery.
• Always use a Sony "InfoLITHIUM" battery. We
recommend using NP-F970/F770.
• The Sony "InfoLITHIUM" battery NP-F570/F550/
F530/F330 cannot be used.
• When carrying the monitor, do not hold the battery.
Attaching
Align the groove of the battery to insert it straight. Make
sure the EJECT button clicks into place and the battery
is locked.
Removing
While pressing the EJECT button in the direction of the
arrow, remove the battery slowly.
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
1 NORTH AMERICA
ARGENTINA
2 LATIN AMERICA
PARAGUAY
PAL&PAL-N
AREA
URUGUAY
NTSC&PAL-M
OTHER AREA
AREA
3
AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
NTSC AREA
4 ASIA EXCEPT
JAPAN
PAL AREA
5 JAPAN
Power Supply / Selecting the Default Settings
3
1
2
COLOR TEMP NTSC SETUP
D65 7.5
D65 0
D65 0
D65 0
D65 7.5
D65 0
D65 7.5
D65 0
D93 0
11-GB