Orifice Holder Removal - Wolf CG365P/S Manual

Install All Burner Caps
Install all burner caps onto the burner assemblies.
Install All Burner Grates
Place all burner grates onto the cooktop.
TIP: Place the side grates first and the center grate last.

ORIFICE HOLDER REMOVAL

To remove the orifice holder, first remove the burner grates,
burner caps, knobs, and bezels. Uninstall the unit, and then
remove the burner assemblies and the burner pan.
WARNING
Turn off the power to the product before starting this
procedure.
CAUTION
If the gas line is not long enough to stay connected
when the unit is pulled out of the opening, the gas
may need to be disconnected.
Remove All Burner Grates
Lift all burner grates from the unit.
TIP: Remove the center grate first.
828389 REV. A 06/2018
CG Contemporary Gas Cooktop Service Manual
Remove All Burner Caps
Remove all burner caps from the burner assemblies.
Remove All Knobs
Pull all of the knobs away from the unit.
Remove All Bezels
To remove each bezel:
Use a
15
3
/ " socket to remove the bezel from the unit.
4
service.subzero.com