5、Maintenance - UNI-T UT-P41 Instruction Manual

the arrow marked on and under the case .
6).Insert the conductor carrying the current to be
measured in the clamp and take the measurement.
7). If necessary, re-check the origin of the graph,with the
jaws not clamped around the conductor,and make the
measurement again.
5. MAINTENANCE
For maintenance,please kindly contact the
reseller or manufacturer..The manufacturer
will not be held responsible for any accident
occurring following repair done other than by
its After Sales Service or approved repairs.
Jaw faces:It is necessary to always keep the jaw

faces clean. Clean them and lightly oil them to
avoid rust.Do not
places, or directly exposed to water.
Handles and case:Clean with a cloth or a sponge

soaked with soapy water,rinse in the same way
without ever getting water on the clamp.Dry with a
cloth or in an air flow.
To maintain the performance of the clamp,it is

advisable to carry out a check or recalibration every
year.
leave the clamp in very damp
9