Setting A Program; Starting A Program; Interruption Of A Program; Changing A Program - Westinghouse WWT6084J5WA User Manual

4.6 Setting a Program

Press Power (
program selector to the required
program.
- Your washing machine is now in
STAND-BY-MODE and ready to
wash your clothes.
-
The relevant light will light up.
-
The buzzer will sound.
-
The selector dial can be turned
either clockwise or anticlockwise.
-
Once you select a program, the
program selected will stay at that
position for the whole of the cycle.
-
The display shows the program
duration.
If the settings shown on the control
panel are what you want to use,
press the Start/Pause touchpad to
start your wash.
If you want your laundry to be
washed with functions different from
the one proposed by the machine,
press Water Level, Soak, Rinse and
Spin option buttons.
NOTE:
Different functions can be combined
which is dependent on the program
selected. When these buttons are
pressed, the corresponding pilot
lights come on.
If you want to define the end of the
washing program, press the "Delay
End" button repeatedly to choose
your machine end time.

4.7 Starting a Program

To start a program, press the Start/Pause
( ) button, a default program duration
will be displayed on the screen.
NOTE
When you select the Rinse & Spin
program, there will be a delay of at least
2 minutes before the washing machine
starts to spin.
) , turn the
This delay is a drain out period to ensure
the bowl is empty of water, which is
necessary before spin commences. Even
though you may have only put wet clothes
into an empty bowl, the delay before spin
will still occur to be safe and to protect
your washing machine.

4.8 Interruption Of A Program

If you have started your wash and you
wish to stop it for some reason, press the
Start/Pause button to enter PAUSE mode.
The time remaining is shown then
" ".
Press the Start/Pause again. The
program will continue.

4.9 Changing A Program

You can turn the Program Selector Knob
to a new program position at any time. If
you do move the Program Selector Knob
the effect will be different depending on
the status of the machine at the time you
do this, as follows:
When the machine is in PAUSE mode,
moving the Knob to a new position will
result in the machine resetting to the
start of the new program.
When the machine is running, moving
the Knob to a new position will result in
the machine continuing the wash and
the display will show "
flashing with 3 consecutive short beeps
to remind you that this option is not
allowed.

4.10 Changing The Options

It is possible to change only some
options after the program has started.
1. Press the Start/Pause button to enter
PAUSE mode.
Change the options.
2.
3. Press Start/Pause button again. The
program will continue.
19
" and