DeWalt DW088 Original Instructions Manual page 44

EnGLIsh
6. Mark the position of the laser beam on the ceiling (b), directly beside the first mark (a).
7. Measure the distance between these two marks.
• If the measurement is greater than the values shown below, the laser must be serviced
at an authorized service center.
Cleaning
• Remove the batteries before cleaning the tool.
• Regularly clean the housing with a soft cloth.
• When necessary, clean the lens using a soft cloth or a cotton bud soaked in alcohol. Do
not use any other cleaning agents.
Protecting the Environment
Separate collection. Products and batteries marked with this symbol must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products
and batteries according to local provisions. Further information is available at
www.2helpU.com.
42
Distance allowable Distance
Between Between
Walls
8'
10'
14'
20'
Distance allowable Distance
Between Between
Walls
2.5 m
3.0 m
4.0 m
6.0 m
and
b
a
1/8"
3/16"
1/4"
3/8"
and
b
a
3.4 mm
4.2 mm
5.5 mm
8.2 mm