DeWalt DW088 Original Instructions Manual page 39

• This product is not intended for use by persons (including children) suffering from
diminished physical, sensory or mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their safety. Children should
never be left alone with this product.
ASSEMBLY AND ADJUSTMENT

WARNING: Do not place the laser in a position which may cause anyone to
intentionally or unintentionally stare into laser beam. Serious eye injury may
result from staring at the beam.
Replacing Batteries (Fig. B)
This laser uses batteries of type LR6 (AA).
• Open the battery compartment cover
• Replace the batteries
• Close the battery compartment cover.

WARNING: When replacing batteries, always replace the complete set. Do not mix old
batteries with new ones. Preferably use only alkaline batteries.
Low Battery Indicator (Fig. A)
The tool has been equipped with a low battery indicator
will blink to indicate that the batteries need to be replaced and the tool will automatically
shut down.
• Switch off the tool and remove the batteries as soon as the indicator blinks.
Setting up the Tool (Fig. C2–C4)
The tool facilitates various set-ups, making it useful for several applications.
Floor set-up
• Place the tool on a relatively smooth and level surface.
Wall Set-up (Fig. C1)
The keyhole in the pivot bracket
14
Alternatively, the tool can be attached to metal studs directly using the magnets
• Drive a screw or nail into the wall.
• Hang the tool onto the fastener by the keyhole.
Fitting the Tool to the Wall Mount (Fig. C2–C4)
The tool has been equipped with a drop ceiling bracket
in drop ceiling installation and other specialty leveling projects. The pivot bracket
magnets to attach the tool to the drop ceiling bracket.
10 .
13 . Make sure the new batteries are placed as indicated .
is used for mounting to wall constructions.
8
3 located on the control panel. It
9 for mounting to wall track to aid
EnGLIsh
15 .
8 has
37