Singer Perfect Finish II Instruction Manual page 10

Cool Mist Spray
The Cool Mist Spray function can be used on any temperature setting. Use the
spray to dampen fabrics in order to remove tough wrinkles.
• Aim the nozzle at the garment.
• Press the Cool Mist Spray Button. You may need to press the button a few
times before the water sprays at full pressure.
• Iron as usual.
• DO NOT SPRAY SILK.
Cool Mist Spray Button
3-Way Smart Auto-Off
The SINGER
Smart Auto-Off switches the iron off if it has been left unattended.
• If the iron is left on its soleplate or tipped over, it will shut off after 30 seconds
and an audible beep will sound.
• If the iron is left on and is not moved for 8 minutes in a vertical position, the
green Temperature Indicator Light will flash and several audible beeps will
sound indicating the Auto-Off has been activated.
• To de-activate the Auto-Off, move the iron or shake gently. The iron will take
about 60 seconds to reach the previous soleplate temperature.
10
Perfect Finish ™ II Iron is equipped with an automatic shut-off. The
®
Cool Mist Spray