Using The Built-In Speaker To Monitor Playback - Tascam PR-10 Owner's Manual

3 – Preparations
8 After the pop-up confirmation message
disappears, press the
the Home Screen.
CAUTION
The date and time setting is only retained for a few
minutes if there is no power supplied to the unit by
batteries or USB bus power. When using batteries,
we recommend that you replace them before they
are completely dead.
Using the built-in speaker to
monitor playback
To use this unit's built-in speaker to listen to a
recording that is playing back, in the
set the setting to
SPEAKER
1 Press the key to open the
SETUP
screen.
2 Use the / keys to select the
+ –
item.
36
TASCAM PR-10
key to return to
HOME
menu
SETUP
.
ON
SETUP
menu
SPEAKER
3 Press the (
¯
Enter
setting screen.
SPEAKER
4 Use the / keys to set it to
+ –
5 Press the (
¯
Enter
setting and the following pop-up message
appears on the display briefly, and then the
setting screen is shown again.
SPEAKER
) key to open the
.
ON
) key to confirm the