Setting The Original Mode - Tanita Body Composition Analyzer BC-418MA Instruction Manual

Setting the Original Mode

This process is utilized to select whether or not you use the target body fat ratio function. (See the printout sample
on page 16.)
< H I N T ! >
The target body fat ratio function is deactivated when this product is shipped from factory.
kg
P T
P T
MALE STABILIZED
FEMALE cm / ft.in
ATHLETIC AGE
STEP ON % FAT
kg
P T
STABILIZED
MALE
or
cm / ft.in
FEMALE
ATHLETIC AGE
STEP ON
% FAT
kg
P T
MALE STABILIZED
FEMALE cm / ft.in
ATHLETIC AGE
STEP ON % FAT
The equipment will start up with these settings next time you use it.
14
1. Press the key while holding down the key.
P T
[0] : The target body fat ratio function is deactivated
[1] : The target body fat ratio function is activated
If the number of print outs is set to "0" during
the process of "Setting the Number of Print
Outs and Language" on page 13, you cannot
preset this item.
2. After the input is completed, the display will
automatically change to the measurement
screen.
15