Table of Contents
Advertisement
Argument Details for the Default DID Service
Use Remainder.
Specifies whether a particular part,
i.e. the remainder, of the inbound number will be used
to form a part of the outbound number.
For a remainder to become non-zero a specified
inbound
Prefix
has to match the first part and/or
a specified inbound
Suffix
has to match the last
part of an inbound number, however individually or
combinations of both never fully match the complete
inbound number.
Both inbound Prefix and Suffix can be defined under
Dialplan entry details
. When
Use Remainder
active the previously mentioned "remainder" will be
appended to and precede the
Prefix
and the
Suffix
of the outbound number, respectively. The outbound
Prefix
and
Suffix
precede and append, respectively,
the "remainder" as to form the complete outbound
number.
The latter prefix and suffix can be defined under
Arguments
. Prefixes and suffixes are standard
parameters of dial plans.
Dialplan entry details
Suppose, as an example, in the
the inbound Prefix equals 9876 and inbound suffix
Arguments
equals 54. In the
settings the outbond
prefix equals 1234. For an inbound connection to
phone number 9876154 the 3G Gateway will strip the
prefix 9876 and the suffix 54 from the called number,
hence the remainder equals 1. For the outbound
connection the 3G Gateway will add the prefix
(configured in arguments) in front of the remainder,
hence the outbound number equals 12341.
For the same settings with an inbound number
9876254 results in an outbound number 12342.
In case the prefix and/or suffix fully match the
inbound number the remainder will be empty and the
useremainder value will be ignored.
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D13841.08
10.2007
Suffix.
Specifies the last part, i.e. the part
appended to the remainder, of the Outbound
number. The outbound suffix can be defined
under
Arguments
.
, is
Allow forwarding.
After call setup the
call is offloaded from the 3G Gateway
system, i.e. not routed via the 3G Gateway
system any longer, to free resources.
Safety/
To Get You
Environmental
Up and Going
DID Argument Details
Prefix.
Specifies the first part, i.e. the part
preceding the remainder, of the outbound
number. The outbound prefix can be
defined under
Arguments
Use sub number.
The sub number is a number
extension following the main number separated from
the main number by an
*
. In this way a number plan
behind a main number can be reached directly.
Using the 3G
Viewing the
Configuring
Gateway
System Status
the 3G Gateway
47
No Media Sources can be added to DID
service.
.
Net type.
H.324m
Either
outbound call.
AV mode.
This mode determines the outbound audio
and video call settings. It is either
+ Video
,
Auto(matic) no fallback to audio
fallback to audio
and
audio
.
•
In the
Audio Only
even when all endpoints support both audio and
video capabilities. Note that this setting will be
overruled in case Allow Forwarding is set to Yes and
both endpoints possess audio and video capabilities.
•
In the
Audio + Video
setup when endpoints support both audio and
video capabilities and a call with both these
capabilities can be set up.
•
Auto
In the
mode a call is being setup according
to the capabilities of the endpoints. Of the latter,
3 versions can be distinguished: no fallback to
audio, fallback to audio or always fallback to audio.
•
In the
no fallback to audio
+ video
or an audio only call is being setup,
depending on the capabilities choice of the
initiating endpoint, i.e. when an
is being set up, whereas the receiving endpoint
only supports audio, the call is terminated.
•
fallback to audio
In the
changed to an audio only call when the receiving
endpoint supports only audio, even when an
video
call is being set up by the initiating endpoint.
•
The
always fallback to audio
the telephony switch interferes or cannot handle
capability renegotiation, therefore when an
+ video
call fails automatically an audio call will be
set up.
Maintenance
Services
Services
& Upgrade
TANDBERG
3G GATEWAY
TANDBERG
3G GATEWAY
USER GUIDE
USER GUIDE
H.323
SIP
,
or
of the
Audio Only
Audio
,
,
Auto +
Auto + always fallback to
mode a voice call is being setup,
mode a call is only being
case either an
audio
audio + video
call
case capabilities can be
audio +
case is used in case
audio
Dial Plan
Contact
Examples
Information
Advertisement
Table of Contents
