Ip Configuration - TANDBERG D13841.08 Administrator's Manual

IP Configuration

Select IP from the
Configuration to access the
IP Configuration pane.
DNS Interface
Up to five Domain Name
Server IP addresses can be
specified here. Your LAN
administrator will provide
the correct values for these
fields. By default these
fields are set to 127.0.0.1
Date and Time Settings.
An
NTP server address can be
specified here to provide the
3G Gateway with up-to-date
time and date information.
Save.
When ready to store
the new settings, press
Save
. These settings will
take effect when the system
has been restarted.
Restart.
This button will
restart the 3G Gateway.
Any changes made in the
IP Configuration of the 3G
Gateway will take effect
after the system has been
restarted.
Table of Trademarks & Patents &
Contents Copyright Disclaimers
D13841.08
10.2007
Safety/ To Get You Using the 3G
Environmental Up and Going Gateway
Viewing the Configuring Configuring Maintenance
System Status the 3G Gateway the 3G Gateway
35
TANDBERG
TANDBERG
IP Address Assignment is DHCP or Static:
•
DHCP:
Dynamic Host Configuration
Protocol can be selected when a DHCP
server is present. Static IP Address, Static
IP Subnet Mask and Static IP Gateway are
ignored because these parameters are
assigned by the DHCP server.
•
Static: If Static assignment is used, the 3G
Gateway's IP address, IP subnet mask, and
the Gateway's IP address must be specified
in the respective IP address fields.
IP Ethernet Speed provides five settings to
choose from:
•
Auto
The Gateway will negotiate detect the
speed and duplex on the LAN.
•
10Half The Gateway will connect to the
LAN using 10 Mbps/Half Duplex.
•
10Full The Gateway will connect to the LAN
using 10 Mbps/Full Duplex.
•
100Half The Gateway will connect to the
LAN using 100 Mbps/Half Duplex.
•
100Full The Gateway will connect to the
LAN using 100 Mbps/Full Duplex.
IP Address . The Static IP Address defines
the network address of the 3G Gateway. This
address is only used in static mode. Your LAN
administrator will provide you with the correct
address for this field.
IP Subnet Mask . The Static IP Subnet Mask
defines the type of network. Your LAN administrator
will provide the correct value for this field.
IP Gateway . The Static Gateway IP address is
set to 127.0.0.1 by default. In case of a router
enter its address here. Your LAN administrator
will provide the correct value for this field.
Dial Plan
Services
& Upgrade Examples
3G Gateway
3G GATEWAY
USER GUIDE
USER GUIDE
Contact
Information