Table of Contents
Advertisement
Starting Up the 3G Gateway
3G Gateway Start-up
To start the 3G Gateway, simply connect the
power cable, and set the power switch button
(both at the rear) to position
I
.
Power switch
On the front panel of the system the power
indicator LED, marked
PWR
, will turn GREEN.
Table of
Trademarks &
Patents &
Contents
Copyright
Disclaimers
D13841.08
10.2007
You may access the 3G
Gateway by entering the IP-
address of the 3G Gateway
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter admin as
user name. The default
password for the 3G Gateway
is TANDBERG. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the 3G Gateway.
Reboot the 3G Gateway.
Connect to the 3G Gateway via the serial interface once it has
restarted.
Login with User Name pwrec.
No password is required.
Safety/
To Get You
Using the 3G
Using the 3G
Environmental
Up and Going
Gateway
Gateway
Accessing the 3G Gateway
Forgot the Password?
You will be prompted for a new password.
The
Beyond that time, the system will have to be restarted to
change the password.
Viewing the
Configuring
Maintenance
System Status
the 3G Gateway
17
TANDBERG
TANDBERG
USER NAME
PASSWORD
password is
case sensitive)
pwrec
account is active for one minute following a restart.
Dial Plan
Services
& Upgrade
Examples
3G GATEWAY
3G GATEWAY
USER GUIDE
USER GUIDE
admin
is
. Default
TANDBERG
(NB!
Contact
Information
Advertisement
Table of Contents
