Extending The Functionality Of The Phone; Multiple Handsets - Gigaset easy E295 Manual

Extending the functionality of the phone

Extending the functionality of the phone

Multiple handsets

Up to four handsets can be registered with the base.
Every device is assigned an internal name and internal number (INT 1 – INT 4). The assignment
can be changed.
All internal numbers are already assigned:
Registering a handset
The Please register handset display flashes or you want to register the handset with a different
base.
Registering from the display key or menu
Registration must be initiated both on the base and on the handset. Both must be
within 60 seconds.
On the handset
Press the display key Registr.
or
Menu Settings
Enter as required the system PIN of the base (default: 0000)
On the base
Within 60 seconds, press and hold the registration/paging key for a minimum of 3 seconds.
The registration process takes about 1 minute. Handsets are assigned the lowest avail-
able internal number (1 to 4). If internal numbers 1 to 4 are already assigned to other
devices, number 4 is overwritten.
Some Gigaset bases and bases/routers from third party manufacturers might not be
fully compatible with the handset and not all functions are displayed correctly. In
such cases, use menu entry Legacy (GAP) Registration. This guarantees correct dis-
plays on the handset, but can entail restrictions for some functions.
34
De-register any devices no longer needed
OK Registration OK . . . The display shows Registering...
OK