Table of Contents
Advertisement
Error Messages and Displays
The following warnings appear in the camera aperture display.
Display
Lens aperture ring is not
FEE
locked at minimum aperture.
Non-CPU lens is attached, or
F––
no lens is attached.
Restrictions
• Auto and best moment capture modes are not supported.
• Motion Snapshots can be recorded only when an AF-S lens is
attached and AF-S (Single AF) is selected for focus mode and
then only when the camera is in focus. Do not attempt to
adjust focus using the focus ring.
• Shutter speeds of 1 s or slower are not available.
• The sound monitor switch and focus operation button (Focus
Lock/MEMORY RECALL/AF Start) have no effect.
Precautions for Use
• Lenses over 380 g (13.4 oz) should be supported at all times.
Do not hold the camera or carry the camera by the strap with-
out supporting the lens. Failure to observe this precaution
could damage the camera lens mount.
• Lines may appear in photographs taken with non-CPU lenses
stopped down to minimum aperture.
• The camera continues to adjust exposure during movie record-
ing. Select mode v or w to prevent sounds made by the lens
being picked up by the microphone.
• During continuous shooting, focus is fixed at the position for
the first shot in each burst. Frame rates will slow when 5 fps is
selected for Continuous.
Problem
Solution
When using CPU lenses, lock
aperture ring at minimum aper-
ture (highest f-number).
When using non-CPU lens, rotate
lens aperture ring to adjust aper-
ture.
n
207
Advertisement
Table of Contents
