Table of Contents
Advertisement
To zoom in on the display for more
precise focus, press J (note that this
feature is not available during movie
recording or in slow-motion movie
mode). A navigation window will
appear in a gray frame at the bottom
right of the display.
Rotate the command dial right to
zoom in to a maximum of 10×, left to
zoom out. Use the multi selector to
scroll to areas of the frame not visible
in the display. Press J to exit zoom.
The Electronic Rangefinder
If a CPU lens is attached in manual focus
mode, the focus indicator can be used to
check whether the camera is focused on
the subject in the center focus area.
Focus indicator
I
2
4
2
4
(flashes)
Note that with some subjects, the in-focus indicator (I) may be
displayed when the camera is not in focus. Check focus in the
display before shooting.
n
206
In focus.
Camera focused in front of subject.
Camera focused behind subject.
Unable to determine focus.
Navigation window
Command dial
Status
Advertisement
Table of Contents
