Table of Contents
Advertisement
Remote control mode: From a distance of
5 m (16 ft) or less, aim the ML-L3 at the
infrared receiver on the front of the
camera (0 2) and press the ML-L3
shutter-release button. If 2 s delay is
selected for Remote control in the
setup menu (0 163), the self-timer lamp will light for about
two seconds before the shutter is released. If Quick response
is selected, the self-timer lamp will flash after the shutter has
been released.
Note that the timer may not start or a photograph may not be
taken if the camera is unable to focus or in other situations in
which the shutter can not be released. Turning the camera off
cancels self-timer and remote control modes. Remote control
mode is cancelled automatically if no operations are performed
for about ten minutes after the mode is selected in Step 2.
t
66
Advertisement
Table of Contents
