Table of Contents
Advertisement
Optional Flash Units
In still image mode, optional flash units for Nikon 1 cameras can
be used for lighting effects such as bounce-flash photography
or, when an optional SB-N5 flash unit is attached, to provide cap-
ture illumination in best moment capture and Motion Snapshot
modes. The built-in flash does not fire when an optional flash
unit is attached.
In the instructions that follow, the optional SB-N5 flash unit is
used for illustrative purposes.
Attaching Flash Units
Mount optional flash units on the camera multi accessory port.
1
Remove the multi accessory port cover.
Remove the cover as shown at right.
Keep the cover in a safe place and
replace it when the port is not in use.
t
2
Attach the flash unit.
Turn the camera off and mount the
flash unit on the multi accessory port
as described in the manual provided
with the flash unit.
A
Supported Flash Units
The camera supports only flash units designated for use with Nikon 1
cameras.
72
Advertisement
Table of Contents
