Hdd Installation - Genie WNVRN18P5 Quick Start Manual

2.0 HDD Installation

This series of the product supports 1 SATA hard drives. Please make sure that the device is
powered off before the installation. The pictures of the installation are for reference only.
1.
3. Put the HDDs onto the bottom of the
5. Turn over the machine and secure
Note: Please check the inside structure of the device and make sure that the cables are
connected well before installing the cover back. Please format the HDD before using.
6
Loosen the screws to open the cover.
device.
the HDD with the screws.
2. Place the HDD onto the bottom
of the machine.
4. Connect the power and data
cables.
6. Install back the cover and secure
it with the screws.