Upnp - Genie WNVRN18P5 Quick Start Manual

7.0 UPnP

You can use the UPnP function to enable the fast connection of the device to WAN via a
router without port mapping.
1.
2. Enable the UPnP function in the router.
3. Click "Refresh" button to refresh the UPnP status. If the UPnP status were still "Invalid
12
Go to Start → Settings → Network → UPnP, and enable UPnP and then click "Apply"
button to save.
UPnP" after refreshing it for several times, the port would be wrong. Please change the
mapping type to "Manual" and then click
turns to "valid UPnP".
to modify the port until the UPnP status